Scrub it lightly with an old toothbrush then rinse and dry. This is commonly a problem in hard water areas such as Bristol and London. If there is a build-up of limescale around your taps or waste you can use a bit of your toilet cleaner if it has limescale remover in it. Rinse the sink down, any metal areas such as drains and taps are prone to watermarks so wipe these down with a dry cloth or sponge to ensure they are completely dry. If this doesn’t work, you can use bicarbonate of soda, make sure the sink is dry and sprinkle this over the surface and rub in and rinse. Spray the sink with your chosen cleaner, including the drain and taps and thoroughly wipe and work this into all areas.įor stubborn areas, you may need to apply a bit more pressure or use a rougher sponge. Then rinse the sink, if you don’t do so it will be hard for your washroom cleaning liquid to work as it will be tackling any leftover debris. Take a wet sponge or cloth and wipe the sink down to remove and dust and obvious grime and don’t forget the drain.
#Weclean office bathrooms how to#
It is vitally important to know how to clean a washroom sink properly as this is where you wash away any bacteria from your washroom visit. If your toilet is particularly stained, read our guide on how to clean a stained toilet. And lastly, wipe the seat with a dry cloth to leave it dry and smear-free. Use a moist cloth to remove any chemical cleaners once done as you don’t want these coming in contact with people’s skin. Clean the toilet seat by using an antibacterial spray, don’t forget to lift the lid and do both sides. It’s amazing where bacteria (and therefore odours) can be trapped. This means cleaning the toilet cistern first, including the handle which is a key touchpoint, and then the lid, next the seat and finally the bowl itself making sure to clean the outside of the bowl and right down to the floor including any pipes behind. Scrub lightly and then flush.Īlways clean from directly inside to clean properly. If you are using a normal domestic cleaner bought from a supermarket then leave for 4 hours or overnight. If you are using a commercial toilet cleaner with a limescale remover in it then leave the chemical to work for 5 minutes. Then pour your chosen toilet cleaner around the rim of the bowl and use the toilet brush to scrub the inside, not forgetting under the rim itself. This will expose the china under the waterline. However, tackling this the right way can be straightforward, prevent buildup of dirt over long periods, and kill harmful bacteria and viruses.įlush the toilet and then take the toilet brush and reduce the water level in the toilet by pumping the brush up and down to push the water around the bend. ToiletsĬleaning a toilet can be an unappealing task.
#Weclean office bathrooms full#
At the end of this post, you will have a full how to clean your washroom checklist. Rubber gloves not only protect you from bacteria but also from harmful chemicals coming in contact with your skin.ĭon’t expect this to be a mess-free chore, water splashing is almost inevitable so make sure you have the right clothes on or wear an apron to protect your clothes.īy following our washroom cleaning guide, you will be able to efficiently ensure a clean washroom. So, in this guide, we will be discussing how to properly clean a washroom.įirstly, you need to make sure you have everything on hand to carry out your cleaning needs.
Nobody wants to use an unsanitary washroom. Shared office spaces are notorious for being the dirtiest areas in an office environment and maintaining a clean, pleasant washroom is essential to keeping happy workers.
0 kommentar(er)
